We inserted the completed
unit into the rifle and located
the retaining pin
We pulled the trigger back slightly to insert the trigger retaining pin
We carefully inserted the spring using a special tool .
Standard springs will fit but we were asked to fit a TITAN mainspring - which needs to be cut down
Once everything was assembled we attached the link arm and barrel onto the cylinder and located the pin
We closed the breech and ensured that there was a good seal
DISCLAIMER - THE STRIP AND REBUILD OF THIS WEAPON HAS BEEN DONE BY A QUALIFIED AIR RIFLE ENGINEER USING THE CORRECT TOOLS AND SAFETY EQUIPMENT. DO NOT ATTEMPT THIS WORK YOURSELF. WE WILL GLADLY UNDERTAKE THE WORK ON YOUR BEHALF IF YOU ASK US.
If your weapon is seized by the Police they will also seize your pellets
They will test it with your pellets and theirs.If either fires at 12 ft lbs or more you will be prosecuted for unlawful possession of a Section 1 Firearm
IF YOU HAVE FOUND THIS INFORMATIVE - PLEASE LIKE US ON FACEBOOK
Tested and Chronographed at 8.57 ftlbs. Sub 12ft lbs in the legal limit for unlicensed air weapons in the UK.
We slid combined C/D into B
We inserted the completed unit into the housing and located the pin hole and slid in the pin
We inserted the spring tensioning pin
We placed the trigger (f) and trigger spring (g) as shouwn
We inserted the trigger spring (g) into the trigger (f)